Plastering & Gib Stopping Tawa Wellington

Tawa has one of Wellington's largest concentrations of 1960s and 70s family homes, and a lot of them are now at the point where a full interior update is overdue. The original wall linings — often hardboard or early gib that's been patched repeatedly over the decades — are limiting what the rooms can look like no matter how good the paint job is. Replacing them and getting a proper flat finish is how Tawa homeowners are turning tired interiors into modern, well-finished family homes. It's work we do a lot of in this suburb, and we're set up to handle it at volume.

Why Choose Our Gib Stopping in Tawa

Built for renovation-scale projects

Single rooms are fine, but we're equally comfortable working through an entire Tawa house — lounge, hallway, bedrooms, kitchen, the lot. We bring the right crew size for the job and sequence the work to keep things moving without cutting corners on prep or finish quality.

Making 1960s-70s homes look current

The challenge with older Tawa homes isn't just the surface — it's the framing and original construction behind it. We know how to navigate slightly unlevel walls, old stud positions, and rooms that weren't quite square when they were built. Good stopping work corrects as much of that as possible, giving painters and fitters a surface that behaves like a modern build.

Straightforward pricing on big jobs

For large projects in Tawa we give whole-house quotes, not guesses. You know what the job costs before we start, not after.
More on our gib stopping services.

Our Gib Stopping Process

We start each Tawa job with a proper assessment: what linings are coming out, what framing needs attention, what the target finish level is. New gib goes up correctly — right sheet thickness, correct fastening pattern, no skipped steps. Taping and stopping follows in sequence, with each coat fully dried and sanded before the next goes on. We finish to a level 4 standard on all painted surfaces as our default, and level 5 where requested for high-gloss or feature walls.

What's Included

Full service covers removal of old linings where needed, gib supply and installation, all taping and stopping materials, multi-coat application, sand-back, and a handover-ready surface. We clean up properly throughout — important on occupied family homes in Tawa where the rest of the house is still in use.

Cost Guide

Standard stopping on new or replacement gib in Tawa: $8–$15/m². Work on older construction with more prep: $12–$20/m². A single room sits around $800–$1,500. For a whole-house renovation across multiple rooms, budget $1,200–$2,400+ per room — larger jobs typically come in at the lower end of the range per room. We'll give you a complete written quote after the site visit.

FAQs

Can you work room by room while we're still living in the house? Yes, and we do it all the time in Tawa. We'll work out a sequence with you that keeps disruption manageable.

How do you handle the old linings? We remove and dispose of them as part of the job. Fibrolite requires careful handling and correct disposal — we're across that.

How long does a full house take? Depends on the size and condition, but a typical 3–4 bedroom Tawa home in renovation takes 2–3 weeks including drying time between coats.

Areas We Cover

We work throughout Tawa and the surrounding area including Linden, Takapu Valley, Kenepuru, and Porirua. We're one of the more active gib stopping crews in the northern Wellington region.

Get a Free Quote

Whether you're doing one room or the whole house, get in touch for a free quote on your Tawa gib stopping project. We'll come out, assess the scope, and give you a number you can plan around.